|
 |
|
Paging data receiver can provide a wireless information solution for
any institutions at variable remote locations. These remote locations include, but are not
limited to, Industrial & Manufacturing Facilities, Entertainment & Sports Centers,
Community Centers, Sports Bars, Malls, Schools, Offices, Churches, Hospitals, Banks &
Financial Institutions. Paging data receiver with the wireless messaging service can
deliver both customized content via the Internet and up-to-the-minute news, sports,
business, financial, weather, custom messaging and entertainment information to the
electronic LED sign and your PC. It creates an exciting indoor or outdoor communication
tool to stimulate conversation and keep your customers entertained and informed, and the
custom wireless messaging also can promote your products and services through in-store
advertising or keep your employees informed of company activities, policies, etc., through
custom wireless messaging. In order to receive and display the wireless messaging
information, you must have a paging data receiver and an LED sign. For specific coverage
areas of wireless messaging services, please contact your local paging service providers.
For specific LED signs of connecting the paging data receivers, please contact us for more
details!
Key Features:
- 16 set capcode
- Automatically transmit incoming message to host capcode, frequency
and other parameters configuration via serial port
- Four (4) LED Indicators (Power ON, Message Error, Transmitting
Message, and Out-of-Service Range)
- Group call function
- Message alert (w/ ON/OFF control)
- Message error indication
- Message length indication
- Message sequential number indication
- Message stamping
- Numeric/alphanumeric message reception (Language transparent)
- Re-transmit incoming message to host
- Support both message and configuration modes (mode control via
command)
- Transmit all stored messages to host
- Up to 16 mail drop message slots
- Up to 16,000 bytes storage for mail drop messages
- Up to 16,000 bytes storage for personal messages
- Up to 20 personal message slots
Specifications:
- Weight: 0.56 oz (w/o case & external antenna)
- Dimensions: 2.62 ´ 1.89 ´ 0.55 inch (w/o case)
- Input Voltage Range: 5 ~ 9Vdc
- Current Drain:
Interface #1: 2.8mA @ 5V (standby mode)
6.5mA @ 5V (active mode)
Interface #2: 100µA @ 5V (standby mode)
5.0mA @ 5V (active mode)
- Operating Temperature: –10° C~ +50° C
Wireless Receiver:
- Signal Protocol: FLEX
- Message Format: compliant with FLEX numeric and alphanumeric format
|
Operating Frequencies:
- 929 ~ 932MHz (FLEX synthesized)
- Automatic Gain Control (AGC)
RF Characteristics:
929 ~ 932MHz
- Sensitivity: -103 dBm
- Image Rejection: 40 dB
- Inter-modulation Rejection: 50 dB
- EIA Selectivity: 50 dB
- Frequency Deviation: ± 4.8kHz
- Frequency Stability: ± 5 ppm
Serial Port between Host & Receiver:
- Signals: TXD, RXD, and CTS
- Data Rate: 9600bps
- Data Length: 8 data bits (w/ no parity bit and 1 stop bit)
- Mode: half duplex
- Interface (either option)
- Interface #1: RS232 bipolar signal (±6.8V) w/ RJ-11 6P Phone Jack
- Interface #2: TTL unipolar signal (0/+3.3V) w/ 6-pin SIP (pitch 0.1
inch)
- Message Formats: transparent format, and TGC proprietary packet
format
Notes:
1. Specifications subject to change without
notice.
2. FLEX is a registered trademark of Motorola. |
| Model No. TSPM9FXSB |
Model No. PMKITS ONLY (w/o a Programming Software CD) |
Model No. PMKITS & PDRSOFT (w/ a Programming Software CD) |
 |
 |
 |
Copyright 2007 DigitPro
Communications, Inc. All rights reserved. Specifications subject to change without
notice. DigitPro Communications, Inc. is not responsible for typographic error.
Any problem regarding this site, please contact webmaster@digitprocom.com |
|
